/
/
26 kW coolant heater, 400 V
Top of the range · POWERHEAT series

26 kW coolant heater on 400 V

One housing from 12 to 26 kW, for 150 to 500 litres

The 26 kW coolant heater is the largest unit in the POWERHEAT line, our own heater. On 400 V three phase it heats engines with 150 to 500 litres of coolant; versions for 440, 480 and 690 V use the same housing. The thermostat is adjustable from 20 to 90 °C.

The element is cast into an aluminium heat exchanger and never touches the coolant. Pump, transformer, contactor and both thermostats sit in one IP67 housing of 668 × 190 × 291 mm, the same size as the 12 kW unit. POWERHEAT is fitted as first assembly on several MAN marine engine applications.

26 kW coolant heater from the POWERHEAT series with integrated circulation pump
Our own line
26kW
Heating output
400 – 690V
Three phase supply
150 – 500L
Coolant volume covered
20 – 90°C
Adjustable thermostat
IP67 · EU madeSealed housing, integrated pump and control, CE marked.Contact Us →
Coverage

What a 26 kW coolant heater covers

The POWERHEAT line covers 150 to 500 litres of coolant in six outputs: 12, 15, 18, 20, 24 and 26 kW. The 26 kW unit is chosen for the upper end of that band, or for engines in cold, exposed positions. Below 150 litres a TopStart is the better fit.

POWERHEAT 12 to 26 kW coolant heater
This configuration
SeriesPOWERHEAT
Output26 kW
Supply400 – 690 V
Coolant volume150 – 500 L
CirculationIntegrated pump
Thermostat20 – 90 °C adjustable
Weight29,3 kg
01
Choosing between 12 and 26 kW

All six outputs share the same housing, pump and connections, so the choice is only about heat. The volume sets the starting point; the ambient temperature and how quickly the engine must reach its set point decide the step.

02
Which engines reach this size

Large standby generators, marine main and auxiliary engines, rail and industrial diesels: typically high-speed V engines up to V20. The volume is in the engine manual; send us the make and model and we check it.

03
Above 500 litres

One engine can take two or more POWERHEAT units, for example 2 × 26 kW. Very large low-speed propulsion engines are heated from the ship's boiler system instead.

Voltage

400 V, 440 V, 480 V or 690 V

400 V three phase is the standard industrial supply in the UK and the default for this unit. POWERHEAT is also built for 440 V, 480 V and 690 V, voltages found on ships and offshore installations. Each version is wired for one voltage, so we confirm the supply before we name the model.

Standard on UK sites
400V

The usual supply in plant rooms and on standby boards.

Model PH3400
Marine networks
440 / 480V

Common on ships' electrical networks.

Model PH3440 · PH3480
Offshore and heavy plant
690V

Lower current for the same output, so lighter cabling.

Model PH3690
01
Connected load

At 26 kW the heater is a real load on the board: about 38 A per phase at 400 V and about 22 A at 690 V. Cable, protection and isolation are sized by the installing electrician from the datasheet.

02
Why single phase is not an option

Above about 3 kW a heater needs three phase. Sites with only 230 V are limited to Zerostart, FlowStart and TopStart 1 – 3 kW. For a large engine without three phase the answer is a supply upgrade, not a smaller heater.

03
Built-in control

The transformer for the 230 V pump, the contactor and both thermostats sit inside the POWERHEAT housing, with a lamp for power on and one for heating in operation. The unit connects directly to the three phase supply.

Before you order

What customers ask about a unit this size

"26 kW sounds like overkill"

Below 150 litres it is. We size on coolant volume first and name the smallest output that reaches the set point.

"We have no three phase at the set"

Then this is not the unit. Single phase stops at about 3 kW; a large engine needs a supply upgrade first.

"It will not fit our enclosure"

From 12 to 26 kW the housing stays 668 × 190 × 291 mm, compact for this output. That is why it suits containers and engine rooms.

Send the litres and the voltage
Our experienced team replies with the model number and its datasheet.
Installation

What fitting a unit this size involves

Fitting a 26 kW coolant heater is two jobs: the coolant connection and the electrical connection. With its own pump the unit does not rely on convection, so it can be mounted wherever there is room near the engine.

01
Coolant side

Two 1" connections: one draws from a low point on the block, the other returns to the engine. Maximum operating pressure is 10 bar. Drain the engine to below the tapping point before you start.

02
Mounting and access

The unit weighs 29,3 kg and stands on its own supports, not on the hoses. Leave access to the pump and the thermostat. All dimensions are on the datasheet in millimetres.

03
Before you order

We need four details: coolant volume, supply voltage, the target coolant temperature from the engine manual, and where the engine stands. With those we confirm the model number.

Large diesel engine of the size served by a 26 kW coolant heater
The range around it
TopStart 4 – 9 kW30 – 150 L
POWERHEAT 12 kWLower half of 150 – 500 L
POWERHEAT 26 kWUpper band or exposed engines
Above 500 LTwo or more units
Technical documents

Datasheets as open PDF downloads

Voltage, output, thermostat range, connections, weight and dimensions per model.

POWERHEAT 12 – 18 kW
12 – 18 kW
POWERHEAT 20 – 26 kW
20 – 26 kW
TopStart 4 – 12 kW
4 – 12 kW
A model that is not listed? Our experienced team sends you the right document.Contact Us →
FAQ

Frequently asked questions about the 26 kW coolant heater

01What coolant volume does a 26 kW unit cover?+

The POWERHEAT line covers 150 to 500 litres. The 26 kW unit is chosen towards the upper end of that band, or lower in the band when the engine stands in a cold, exposed position. Below 150 litres a TopStart is the better fit.

02Can it run on 690 V instead of 400 V?+

Yes. POWERHEAT is built in 400, 440, 480 and 690 V versions (PH3400, PH3440, PH3480 and PH3690). Each is wired for one voltage, so state the supply in your enquiry.

03Is there a single phase 26 kW heater?+

No. Above about 3 kW a heater needs three phase. With only 230 V available the options stop at TopStart 1 – 3 kW.

04What is the thermostat range?+

The control thermostat is adjustable from 20 to 90 °C and a safety thermostat cuts out at 120 °C. Most engine builders ask for 40 to 55 °C on a standby engine; the exact figure is in the engine manual.

05Does the heating element touch the coolant?+

No. The element is cast into the aluminium heat exchanger, which is Teflon coated. The coolant flows over a large heating surface without direct contact with the element.

06How much power does it draw?+

26 kW while the thermostat calls for heat and nothing once the set point is reached. How long it runs depends on how well the engine is sheltered. At 400 V the current is about 38 A per phase.

07What is the difference from the 12 kW unit?+

Only the output. Both share the housing, the pump (2,8 m³/h), the 1" connections, the thermostats and the weight of 29,3 kg. Volume and ambient temperature decide which output you need.

Still a question
Ask the team that sizes the units

Send the coolant volume, the voltage and the target temperature. Our experienced team replies with the model number.

Four details and we confirm the model

Coolant volume, supply voltage, target temperature and where the engine stands. We reply with the model number and its datasheet.